Fix Some Simple Water Heater Faults Yourself

Have you ever thought about how often you use hot water in 24 hours? You probably haven’t until you have the problem that there is no hot water in your home. Only then did you realize how much you need hot water. To have hot water in your home, check out some water heater repair and troubleshooting tips.

If your electric water heater is not heating water, there are two reasons. The first is that the power supply is interrupted, and the second is that the heating elements of your boiler are not working. That’s why it’s best to check if the power supply is OK first. Start from the pilot light on the water heater. If it does not light up when the switch is on, first check if the fuse is good. If yes, then check the switch. When you check the switch and if it is broken, replace it, and if it is good, check the thermostat on the water heater.

You will perform this check by increasing the temperature on it. If the water does not heat up again, it means that the thermostat is broken. This problem is solved very simply by replacing the thermostat. If it is also correct, only the heater remains.

The heater may not work due to a large deposit of sediment on it or because it has burned out. Replacing the old heater is very simple. It is important that you buy a heater that will match your water heater model.

If you happen to have no hot water in your home, these are some of the water heater repair and troubleshooting tips recommended by experts and which you can easily solve yourself.